Pedal Effort Sensor

The AutoStop® Pedal Effort is a portable, battery-powered, in-vehicle pedal effort sensor for monitoring pedal force

Measures the force exerted on the brake pedal during brake tests. The pedal mounts quickly and easily using stainless steel clips. The sensor can be used with the WorkshopPro 10. Pedal force measurements are independent of the angle of the activation force.

1. Installed in seconds
2. Accurate and easy to use with simple three-button operation
3. Measures peak pedal force
4. Records pedal effort versus time
5. Data downloadable to PC via RS 232 interface enabling the user to graph pedal force values
6. Suitable for use with brake tests
7. Interfaces AutoTest Workshop Pro 10 allowing brake tests with pedal effort

The AutoStop® Pedal Effort is used in conjunction with the AutoTest® WorkshopPro 10 and cannot be used as a stand alone item.

3 easy testing steps with AutoStop™ Pedal Effort Sensor

1. STEP 1: Attach the pedal sensor to the brake pedal
2. STEP 2: Turn on Pedal Effort Sensor
3. STEP 3: Apply brake pressure

To measure peak pedal force

1. STEP 1: Attach the pedal sensor to brake pedal
2. STEP 2: Turn on Pedal Effort Sensor & press TEST
3. STEP 3: Apply pressure to the brake pedal for up to 50 seconds Test triggers at 20N

Features :

1. Simple two-button operation via a tactile membrane pad
2. Lightweight (500grms), dimension (90 x 145 x 32mm)
3. Automatic start function
4. Automatic shut-off to preserve battery life
5. Calibration is internationally traceable through NATA
6. Interval of calibration as determined by the relevant local authority
7. 12 months warranty
8. Internet support for diagnostics and calibration
9. Comprehensive after-sales service and assistance
10. Bluetooth Interface
11. Storage capability
12. PC download and Grap

1. Input :
1. Load cell: accuracy ±2%
2. Output
1. Peak pedal effort
3. Power Source
1. Four AA batteries
4. Temperature & Humidity
1. -5°C - 50°C
2. 25% - 85%, non condensing